Essential Guide to Cable Cleaning
Running cable can be a messy business, so cleaning is an important consideration for both high voltage and communication cable installations. When the failure point can be in a wall, underground, or hundreds of feet underwater, a high quality...
Read This Post
Desoldering Wick Application Guide
Solder wick, desoldering braid, or just “wick” are all names for a copper braid that is used to absorb solder. It is generally coated with flux, so when heated, solder is melted, drawn up, and retained using a combination of wetting...
Read This Post
Video Demo: Coventry Medical Flexible Tubing Swelling Agents
Hi I’m Mark Quigley, Life Sciences Market Manager for Coventry. Coventry is a brand of Chemtronics, with clean room precision solvents, wipes, and swabs for both sterile and non-sterile applications. Coventry products are commonly used...
Read This Post
Alcohol Wipes for Both Everyday Cleaning and Critical Applications
For many organizations, presaturated wipes are the ideal mix of form and function. Isopropyl alcohol (IPA) wipes are commonly used for degreasing, cleaning off fingerprints, removing flux residues, and even disinfecting hard surfaces. Alcohol...
Read This Post
Webinar: Experts' Guide to Vapor Degreasing
Speakers: Pierce Pillon – Senior Field Engineer, ITW Contamination Control Electronics Kevin Pawlowski – Application Specialist, ITW Contamination Control Electronics Patrick Oliver – Sales Manager, Baron Blakeslee Table...
Read This Post
What solvent can I use to thin this conformal coating?
Heptane can be used as a thinning agent. Make sure it is anhydrous, so contains as little moisture as possible.
Read This Post
What solvent can I use to thin this conformal coating?
Toluene can be used as a thinning agent. Make sure it is anhydrous, so contains as little moisture as possible.
Read This Post
What solvent can I use to thin this conformal coating?
Toluene or acetone can be used as a thinning agent. Make sure it is anhydrous, so contains as little moisture as possible.
Read This Post
What Is the Best Cleaning Solvent for an Ultrasonic Process?
If the chemistry is a good solvency match to the soil, less sonic agitation will be needed. This allows you to run your cleaning process more quickly, at lower temperature, and lower amplitude, decreasing the likelihood of damaging sensitive...
Read This Post
How Do You Maximize Cleaning Performance with Ultrasonic Equipment?
Several adjustments can be made to increase the cleaning performance of your ultrasonic process: Frequency – This is the number of waves in a second, so how “tight” the wave form is. Lower frequencies provide more aggressive...
Read This Post
New Products
Flux-Off Delta
Extra strength, nonflammable solvent that removes heavy and encrusted flux deposits
Coventry ESD Pre-Saturated Poly Wipes
Cleanroom wipes with Mat & Benchtop Reconditioner