Blog Heading

CASE STUDY: Safer Vapor Degreasing for Aviation Hydraulics, Oxygen System & Landing Gear

A major US-based airline MRO (maintenance, repair and overhaul) facility brought us in to evaluate their cleaning processes in their hydraulic shop, oxygen system shop, and landing gear shop. All three departments utilized large-scale vapor...
Read This Post

HOW-TO: PCB Trace Repair Using Foil Jumper & Epoxy Overcoat

Note: This guide is based on the IPC 7721 4.2.1 standard. Purchase the full standard from the IPC organization. The graphics and text have been created to provide easy-to-use instructions. Any content that diverges or supplements the IPC standard...
Read This Post

Case Study: Particle Detection Challenges in Pharmaceutical Cleanroom

Spurious particles can cause serious problems in the pharmaceutical industry, especially in a cleanroom environment. In fact, particles cause more delays in production output compared to machine-related problems. They contaminate the product,...
Read This Post

CircuitWorks Silver Conductive Grease Maximizes Performance & Service Life of Roller Bearings

In the context of machine operation, rolling-element bearings or roller bearings support revolving machine elements and carry their loads while minimizing friction. Degradation of the roller bearings during machine operation may lead to a fault...
Read This Post

Case Studies on The Negative Health Effects of 1-Bromopropane (1-BP, nPB, n-Propyl Bromide)

Recently, U.S governmental agencies along with NGOs (non-governmental organizations) have filed allegations regarding the adverse human effects from the common solvent and degreaser 1-Bromopropane (1-BP). In August 2020, the United States Environmental...
Read This Post

Railway Maintenance of Electrical and Electronic Systems in Trains

Being environmentally friendly, electrical railways have replaced conventional diesel trains in most developed countries. Electric trains emit 20-35% less carbon than diesel trains. In the United States, railways deliver five million tons of...
Read This Post

How to Identify and Solve Thermal Stress Issues in Solder Joints

Modern electronics assemblies are more often exposed to hard temperature conditions e.g., power supplies in airborne radars. Repeated thermal cycling induce thermal contractions and expansions in these electronics assemblies including the substrate...
Read This Post

Webinar: Optimizing Selective Spray Conformal Coating for Maximum Output

Speakers: Pierce Pillon – Senior Field Engineer, ITW Contamination Control Electronics Kevin Pawlowski – Application Specialist, ITW Contamination Control Electronics Jon Urquhart - Director - Global Applications Engineering, PVA...
Read This Post

Choosing The Best Flux for High Quality Electronic Soldering

When joining two metals in a soldering process, like used in PCB assembly, flux is required to achieve a true metallurgic bond. That ensures the solder joint doesn’t crack or come loose even with the day-to-day wear-and-tear. This article...
Read This Post

How can you reduce chemical exposure?

Every organization using hazardous chemicals within their facility has the responsibility to equip their facility and personnel to maintain exposure levels below the TLV. Personal monitoring badges can be used to measure exposure of a specific...
Read This Post

Electro-Wash QD Degreaser

Fast drying, nonflammable electronics cleaner degreaser

Flux-Off Delta

Extra strength, nonflammable solvent that removes heavy and encrusted flux deposits
You did not finish submitting your information to request a sample