My thermal paste seems like it's getting dried out. Can I re-solvate it?
Try adding VMP naphtha (a common paint thinner) to the compound at approximately 1 part VMP to 100 parts compound. Mix thoroughly to get it back to the consistency required. This is mostly by “eyeball” so you may need a little less or a little more, depending on how dry the material is.
Ask A Technical Question
Subscribe
Stay up-to-date on Chemtronics news, products, videos & more.
Related Products
CircuitWorks Boron Nitride Heat Sink Grease
Ultra-high efficiency, thermally conductive grease
CircuitWorks Silicone Free Heat Sink Grease
Non-contaminating silicone free heat-sink grease
CircuitWorks Thermal Paste
Thermal compound for heat transfer away from electronics and electrical components
