Does antistatic freeze spray (circuit chiller) leave a residue?
The alcohol additive that gives Antistatic Freeze Spray its antistatic properties evaporates completely, leaving no residue behind.
Read This Post
How can freeze spray (circuit chiller) avoid static build up?
Antistatic Freeze Spray is specifically formulated with dissipative properties to minimize static electricity build-up. These formulations contain additives that help conduct static charges away from the surface being cooled, reducing the risk...
Read This Post
Is computer duster and freeze spray the same?
Technically they are different products for very different purposes. In many cases, though, the chemical contents are very similar or even identical. In those cases, the valve controls whether you spray vapor (duster) or liquid (freeze spray)....
Read This Post
What is a flux remover?
A flux remover, also known as a flux cleaner or solder flux remover, is a chemical cleaning agent used in electronics and soldering applications to remove flux residues from circuit boards, electronic components, and other soldered connections....
Read This Post
How do I remove flux from a printer circuit board (PCB)?
The cleaning method best for your operation depends on your volume, throughput desired, criticality of the electronics, regulatory restrictions, floor space and other practical considerations. All defluxing processes basically involve 1) dissolving...
Read This Post
Can I use WD40 to clean electrical contacts?
Some cleaners, like WD40, contain oils that are left behind. That can be a good way to prevent oxidation, but it depends on your application and equipment. In some cases, it could be considered a contamination -- especially silicone oil, which...
Read This Post
Can brake cleaner or carb cleaner be used to clean electrical contacts?
Automotive cleaners like brake and carb cleaners are not ideal for cleaning contacts. Generally speaking, they are often very toxic, harsh on sensitive plastics and gasketing materials common in electronical devices, and are very flammable.
Read This Post
What can be used as electrical contact cleaner?
We recommend choosing a solvent engineered specifically for contact cleaning. Other solvent cleaners an be used, but be aware or the following factors: Spray force - Aerosol cleaners are generally used to penetrate into the tight areas around...
Read This Post
How do I desolder with solder wick / desoldering braid?
Step 1: place the wick over the solder to be removed and then place the hot soldering iron over the braid. Step 2: Place the tip at an angle that maximizes heat transfer through the braid to the solder. Use a clean tip that you have just tinned...
Read This Post
How do you measure the thickness of conformal coating?
Measuring the thickness of conformal coating is essential to ensure proper application and adherence to the specified requirements. There are several methods used to measure the thickness, and the choice of method may depend on the type of conformal...
Read This Post
New Products
Flux-Off Delta
Extra strength, nonflammable solvent that removes heavy and encrusted flux deposits
FOCCUS CCT Clear Connection Tool
Easy to use tool for fast and effective end-face cleaning of fiber connectors