The can of duster must be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any liquid product. Extension tube can be used...
Most duster contain refrigerant that is liquid when held under pressure. The goal of duster is to spray the vapor not the liquid, so the valving is designed to capture the vapor from the top of the can. When you shake a can, turn it, or flip...
Most aerosol duster contains a refrigerant/propellant that cannot be considered “air”. As a matter of fact, breathing too much of these vapors can lead to negative health effects. Compressed Air Duster is most commonly filled with...
It can be if used improperly. Aerosol dusters contain pressurized refrigerant, not breathable air as the common names (e.g. “canned air”, “compressed air”) for it suggests. Take care to use in a ventilated area, avoid...
WD-40 is a lubricant dissolved in a solvent. While it can break down grease and oil to a certain degree, it also adds back some. This might be desirable if you are cleaning a hinge, conveyor, or corrosive-prone part, but not if you need it truly...
That depends on the requirements of your application. There are a number of factors that can have a big impact on performance and safety: flammability, dielectric strength, compatibility, toxicity, and environmental impact. Degreasers often...
Yes, it is a good idea to use gloves when degreasing. The solvents used in degreasers do a great job at breaking down greases and oils, which also happen to exist in health skin. If your hands are exposed to a degreasing solvent for enough time,...
There are no degreasers that should be taken internally, but some ingredients are more harmful than others. N-Propyl Bromide (nPB), Trichloroethylene (TCE) and Perchloroethylene (Perc) are highly toxic chemicals commonly used in degreasers to...
Before you start spraying, shut down power to avoid the potential of sparks, electrical shorts or discharges, and other safety hazards. If disconnecting the power is not an option, look for degreasers with a dielectric strength above 30 kV (30,000...
A degreaser is a cleaner designed to remove grease, oils, cutting fluids, corrosion inhibitors, handling soils, finger prints, and other contamination common in assembly, stamping, other types of metal fabrication, refineries, motor repair,...
You did not finish submitting your information to request a sample
Our website uses cookies. To find out more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By clicking 'OK', closing this banner, clicking a link or continuing to browse, you agree to the use of cookies.